SKU: N/A
Factor O2 – Special Editions

Dance up the mountains.

Read More

$4,999.00$6,849.00

  • Clear
Share on

The Factor O2 is now available in two special edition colours; The Swiss and Belgium National Champion Colours.

Think back on the qualities you’ve most admired in the bikes you’ve ridden. If you’re anything like us, that list includes rock-solid handling at speed, confidence in corners, comfort over those roughest roads, stiffness as you gut out a sprint and a fit that didn’t require a million spacers or a custom stem.

The people responsible for how the O2 rides all raced at the ProTour level. This is the bike they wish they had when they were racing. We know first-hand how important solid handling is. We also know that a bike can be too stiff and what that will do to a body when you’re racing for five or six hours a day for days on end.

What we’ve found is that it’s important for a bike to have enough stiffness. Rather than use one steerer dimension for all sizes, we have size-specific tubes and layups so that the feel of our largest frame is the same as the feel of our smallest frame. The O2 is meant to impart an experience, not a look.

Another significant difference between this O2 and the bikes our ex-pros rode is the inclusion of disc brakes. Once you’ve had a chance to ride disc brakes and enter a mountain switchback with the hot speed of a go-kart on a race track and enjoyed the incredible stopping power and precise control that disc brakes offer, going back to rim calipers feels like putting down tube shifters back on the bike. This is the version of the O2 our own staff prefer.

As a factory producing bikes for other companies, we were in at the ground floor developing the first layups for disc brake road bikes. We know what it takes to produce a frame and fork strong enough to take the braking loads of disc brakes without the ride becoming too harsh. And while many manufacturers have had to resort to relaxed geometry to make room for the caliper and rotors, we’ve maintained exactly the same geometry as the rim-brake version of the O2; it gives up nothing in handling.

Even though the O2 doesn’t share the aerodynamic goals of the One, that doesn’t mean we’ve ignored aerodynamics altogether. From the smooth transitions and rounded tube shapes, the lack of sharp edges was a conscious decision to design a bike that performed without compromise without simultaneously giving the bike an aerodynamic flaw that would hurt its rider’s quest for speed.
There’s more to a great carbon fiber frame than just designing a great shape and using good materials. The O2 is a study in the dark art of layup. Not only do we choose particular materials for their ability to contribute to the bike’s stiffness and ride quality, we cut them to exacting standards and place them in carefully selected locations, making sure the layers overlap no more than necessary; extra fiber is a waste, both in performance and weight.

Without such careful attention to detail we wouldn’t be able to produce a frame that weighs 740 grams that is stiff enough to contest Paris-Roubaix and strong enough to still be rideable after a crash.

Bike Options

Chassis, Rolling Chassis

Brake Option

Disc Brake, Rim Brake

Colours

Belgium, Swiss

Frame Sizes

46 cm, 49 cm, 52 cm, 54cm, 56cm, 58cm, 61cm

Bar Width

380 mm, 400 mm, 420 mm, 440 mm

Seat Post

0 Setback, 25 mm Setback

Stem Length

90 mm, 100 mm, 110 mm, 120 mm, 130 mm

Configurations

We offer our bikes in two possible configurations, and we do this for a very specific set of reasons.

We offer our models as a Chassis. Our Chassis is frame, fork, headset, bottom bracket, bar, stem and seatpost. We do this rather than offer just a frame and fork because we have engineered our chassis to work together as a system. When we talk about balance, we’re talking about our obsessive attention to ride quality. Anyone can make a stiff bike or a light bike. We have created a bike that is light, stiff and rides unlike anything else you’ve encountered. That feel depends on using a bar, stem and seatpost designed specifically for that bike.

Finally, we offer a Rolling Chassis. The Rolling Chassis adds wheels to our Chassis of frame, headset, bottom bracket, fork, bar, stem and seatpost. A bike is a system and what wheel and tire you choose can change a bike’s aerodynamics significantly. We have engineered our BLACK INC wheels to be the best possible wheel to work with our bikes.

Features

Our attention to detail on the O2 is absolute, from precisely controlling the material and resin production process, right down to everyday practical detailing that ensures that assembly and maintenance are as refined as the ride itself:

  • UCI Approved for both rim brake and disc brake models.
  • We use layup simulation software called Fibersim that enables us to model the exact size, shape, orientation and placement of every ply, and then add them up into a virtual build of a frame before ever cutting any pre-preg. This process allows us to put no more carbon fiber into the frame than is necessary. As a result, there is no wasted material in the frame; with us, it goes in the garbage, where it belongs.
  • The O2 frame is made with three different carbon types, each selected for different performance characteristics. Standard Modulus, Medium Modulus and High Modulus Pitch Fibre. While the first two are common to the cycling industry the last – the Pitch Fibre – is far more rare because it demands specific skills to work with, and comes at a relatively very high cost. But we use it simply because it’s the lightest and stiffest carbon available for bike frames that can be manipulated.
  • AsAs with other Factor bikes, the O2 Disc uses three kinds of fiber: Standard Modulus, Medium Modulus and High Modulus Pitch Fiber. The High Pitch Fiber is as rare as it is expensive and our workers go through rigorous training to correctly use this material. Despite the cost and difficulty of working with it, we use it because High Pitch fiber helps give Factor bikes their low weight and signature ride quality.
  • The Svelte Fork in both rim brake and disc brake models found on the O2 features a 1 1/8-inch to 1 3/8-inch tapered steerer that smoothly blends into the fork’s crown and down into the fork blades, creating a smooth run of fiber for superior strength and ride quality. Our sculpted blades are designed with minimal surface area to reduce weight and improve aerodynamics while maintaining best-in-class lateral stiffness. The Svelte fork is also designed to easily clear 28 mm tires; the combination of the Svelte fork and larger tires yields a surprisingly comfortable ride for a race bike.
  • The Dura-Ace and SRAM versions of the O2 rim and disc brake models include an option for an integrated bar/stem to further reduce weight and improve comfort as it allowed our engineers to decide exactly where to build in compliance to keep you comfortable on a seven-hour day. Such a design also allowed us to reduce material, cutting weight and improving aerodynamics.
  • We hid the seatpost clamp inside the O2’s frame. We love how this improved the look of the frame, but more importantly, it increased the frame’s comfort by increasing the length of the seatpost that can flex, and simultaneously improved aerodynamics by eliminating that turbulence-creating seat clamp.
  • The hidden seatpost clamp contributes to the O2’s clean and uncluttered aesthetic and improves aerodynamics.
  • We chose the BBright bottom bracket system because it’s light, allows us to improve frame stiffness, reduce weight and is compatible with nearly every aftermarket crank standard, including: BBright, BB386 EVO, standard Shimano, SRAM and Campagnolo 24 mm external-type bottom brackets.

Specs

Option: Frame, Fork, Bar, Stem

  • Frame: RGi Carbon construction, tapered/shaped 1-1/8″ upper and 1-3/8″ lower head tube, compact pro race geometry, internal cable routing, rim or disc (flat mount) brakes
  • Fork: RGi Carbon, Svelte, rim or disc (flat mount) brakes
  • Headset: CeramicSpeed with CeramicSpeed/Factor top cover
  • Bottom Bracket: CeramicSpeed PF4630 Aluminium cups / CeramicSpeed bearings with Wheels MFG 24 mm BBRight Reducers / Adaptors
  • Integrated Barstem: Black Inc Carbon Fiber Integrated Barstem
  • Seatpost: Black Inc Seatpost

Option: Frame, Fork, Bar, Stem, Wheels

  • Frame: RGi Carbon construction, tapered/shaped 1-1/8″ upper and 1-3/8″ lower head tube, compact pro race geometry, internal cable routing, rim or disc (flat mount) brakes
  • Fork: RGi Carbon, Svelte, rim or disc (flat mount) brakes
  • Headset: CeramicSpeed with CeramicSpeed/Factor top cover
  • Bottom Bracket: CeramicSpeed PF4630 Aluminium cups / CeramicSpeed bearings with Wheels MFG 24 mm BBRight Reducers / Adaptors
  • Integrated Barstem: Black Inc Carbon Fiber Integrated Barstem
  • Seatpost: Black Inc Seatpost
  • Front Wheel: Black Inc Thirty clinchers, CeramicSpeed Bearings, Black Inc + CeramicSpeed Hubset (HU-03), Sapim Aero Butted Spokes
  • Rear Wheel: Black Inc Thirty clinchers, CeramicSpeed Bearings, Black Inc + CeramicSpeed Hubset (HU-03), Sapim Aero Butted Spokes
  • Front Disc Wheel: Black Inc Thirty Road Disc clinchers, CeramicSpeed Bearings, Black Inc + CeramicSpeed Hubset (HU-03), Sapim Aero Butted Spokes
  • Rear Disc Wheel: Black Inc Thirty Road Disc clinchers, CeramicSpeed Bearings, Black Inc + CeramicSpeed Hubset (HU-03), Sapim Aero Butted Spokes

Geometry

 

Size 46 49 52 54 56 58 61
Stack 495 495 520 542 565 588 611
Reach 360 367 376 384 392 401 409
Seat Tube Angle 73.0° 73.0° 73.0° 73.0° 73.0° 73.0° 73.0°
Head Tube Angle 70.5° 70.5° 72.5° 73.1° 73.5° 73.5° 73.5°
Fork Offset 53 53 53 43 43 43 43
BB Drop 68 68 68 68 68 68 68
Chainstay Length 405 405 405 405 405 405 405
Seat Tube 430 456 480 502 525 548 570
Top Tube 507 515 535 549 565 581 596
Head Tube 95 95 115 131 154 178 202